--
--
Figure 5 - 4 .
Processor Unit Top Cover
5 . 1 . 2
R E P LACEMENT
Replace the processor unit top cover by sett ing the cover on the unit
1 .
and s l iding it toward the front of the system .
p l ace by t ightening the two retaining screws on top of the cover .
See Figure 5 - 4 .
2 .
P l ace the back p l ate on the processor unit .
spring - loaded CRT disp l ay cab l e
back p l ate and secure the p late by tightening the retaining screw .
.1 1 1 1 1 1 1 1 1 1 1
� Main Unit
Process o r
Secure the cover in
retainer c l ips are not behind the
Removal and Replacement Procedures 5 - 5
Be sure that the