Top Cover - IBM 2193 Hardware Maintenance Manual

Top Cover

To remove the top cover of this system unit:
q
Remove the 4 screws that secure the top cover at the
back of the system unit.
q
Hold both sides of the system unit cover and push it
backward about 25 mm.
q
Lift the top cover up to remove it completely.
q
Touch the bare metal frame of your system unit to
dissipate the static electricity from your body. Do not
touch any of the components inside the frame before
you touch the frame. Do not touch any of the
components that have a voltage warning label.
q
Disconnect the system unit power cord.
105