I f the bottom diskette drive is to be removed also, repeat steps 7 - 9 .
10 .
Figure 5 - 2 6 .
8 11 Diskette Dr ive Assembly (Bottom View)
5 . 1 4 . 2
R E P LACEMENT
Place the diskette drive housing on its side with the installed
1 .
diskette drive (if any) on the bottom.
2 .
S l ide the diskette drive into the housing unt i l the three rear con
nectors can be replaced .
(21
DISKETTE MOUNTING
SCREWS
(41
COVER SCREWS
Replace the connectors . See Figure 5 - 27 .
Remova l and Replacement Procedures 5 - 4 0
COVER