Adapter retainer removal
Before you begin:
v Read "Safety information" on page 113.
v Review the information in "Before you begin" on page 29.
Note: It is recommended that the computer be placed on its left side before
To remove the adapter retainer, do the following:
1. Power-off the computer, if it is on.
2. Unplug the computer.
3. Remove the cover (see "Removing the side cover" on page 48).
4. Remove all adapter cards (see "Installing an adapter" on page 38).
5. Grasp the adapter retainer and gently slide the top and bottom tabs out of the
Top/side cover removal
Before you begin:
v Read "Safety information" on page 113.
v Review the information in "Before you begin" on page 29.
80
Hardware Maintenance Manual: IBM IntelliStation Type 6836, 6846
performing this service procedure. Rotate the feet in toward the computer so
they do not detatch due to the weight of the computer.
notches.