Table of Contents
Advertisement
Troubleshooting
Problem
You cannot add any desti-
nations to a Group even
though the maximum ca-
pacity does not seem to have
been reached.
Cannot print onto paper
even though it is of an ap-
propriate size.
Some part of a copied image
4
is missing.
Cannot have messages or
copies printed on both sides
of paper.
When you turn the power
on, the high-pitched alarm
sounds and nothing is
shown on the display.
102
Solutions
100 destinations have been
programmed with the
number keys. Program ad-
ditional destinations with
Quick Dials or Speed Dials
instead.
Make sure the paper size de-
tection plate for the main
paper tray or optional paper
tray unit matches the paper
size actually loaded in that
tray or unit.
Check that the original is
placed correctly.
Select the correct sized pa-
per.
Specify the tray for which
Two-Sided Printing is
turned on.
The optional 40MB memory
card may not be inserted
properly. Turn the power
off, and then install the op-
tional 40MB memory card
properly. If the alarm
sounds when you turn the
power on after installing the
optional 40MB memory
card properly, contact your
service representative.
Reference
p.47 "Using Quick Dials" or p.48
"Using Speed Dials"
p.184 "Changing the Paper Size",
Advanced Features
p.31 "Placing Originals"
p.208 "Recommended paper sizes
and types", Advanced Features
p.114 "Paper Tray for Two-sided
Printing", Advanced Features
p.202 "40MB Memory Card", Ad-
vanced Features
Advertisement
Table of Contents
