Using Quick Dials - Ricoh 4410L Operating Instructions Manual

Preparation
To use the User Function key with
the Tone function programmed in,
you need to assign this function to
a User Function key beforehand.
See p.105 "User Function Keys",
Advanced Features .
Limitation
❒ You cannot place a tone before the
first digit of a fax number.
❒ Some services may not be available
when using the Tone feature.
Note
❒ A tone is shown as a " • " on the
display.
❒ You can choose whether to use the
{ { { { p p p } } } } key as a Tone key with the p
User Parameters. See p.146 "User
Parameters", Advanced Features .
When using Tone with On Hook Dial
A A A A
Press the { { { { On Hook Dial} } } } key.
B B B B
Enter the fax number with the
number keys.
C C C C
Press the User Function key ( { { { { F1} } } }
to { { { { F10} } } } ) in which"Tone"is pro-
grammed.
D D D D
Enter a code number for receiving
a special service with the number
keys.
Note
❒ The entered number will be sent
by tonal signals.

Using Quick Dials

You can specify a destination simply
by pressing a Quick Dial.
Preparation
You must program the destina-
tion's fax number in a Quick Dial
beforehand. Additionally, you can
program a name for the destina-
tion in the Quick Dial. To program,
edit, or delete a Quick Dial, see
p.62 "Quick Dial".
ZHMS240E
Note
❒ To check the contents of all Quick
dials, print the Quick Dial list. See
p.110 "Reports/Lists", Advanced
Features .
❒ Switch between Quick Dials { { { { 01} } } }
to { { { { 30} } } } , { { { { 31} } } } to { { { { 60} } } } , and { { { { 61} } } } to
{ { { { 90} } } } with the Quick Dial Key Flip
Plates.
Dialing
2
ZHMS170E
47