How To Enter Characters - Ricoh 4410L Operating Instructions Manual

• QWERTZ layout
• AZERT layout
{ { { { ABC/abc} } } } key (Quick Dial 21, 51,
4.
or 81)
Use to switch between upper and lower
case.
5.
Space key (Quick Dial 29, 59, or
89)
Press to enter a space.
{ { { { Symbols} } } } key (Quick Dial 30, 60,
6.
or 90)
Press to enter symbols.
7.
Number keys
Use to enter numbers.
{ { { { Clear/Stop} } } } key
8.
Deletes the character at the cursor posi-
tion. If the cursor is placed to the right of
the last character at the right end of a line,
that character will be deleted.

How to Enter Characters

The following procedure describes
how to enter characters.
Note
ZHMS340E
❒ When you enter a character, it is
displayed at the position of the
cursor. If there is a character at the
cursor position, the entered char-
acter is displayed before the char-
acter.
A A A A
ZHMS350E Enter letters, symbols, or num-
bers.
Characters are entered and the cur-
sor moves.
• For letters, press the Quick Dial
keys.
• For symbols, press the { { { { Sym-
bols} } } } key and 0 or 1 to select
the symbol, and then press the
{ { { { OK} } } } key.
• For numbers, press the number
keys.
Note
❒ When you make a mistake,
press the { { { { Clear/Stop} } } } key.
❒ When you want to insert a char-
acter, move the cursor to the
character right of the position
you want to enter the character,
and enter the character. The in-
serted character is displayed left
of the cursor position.
B B B B
Press the { { { { OK} } } } key.
Entering Characters
87
3