Step 7: Touch Area Setting - Christie Captiva Touch User Manual

sTeP 7: ToUCH area seTTiNg

STEP 7: TOUCH AREA SETTING
1. Select Auto Touch Area Setting:
Note:
™
Exit all software applications.
™
Reduce the ambient light.
™
Do not obstruct or shake lens while setting up the touch area.
™
Check if the projection image is clear. If not, adjust focus to sharpen
the image
If a failure message appears, switch to the Manual Touch Area setting.
2. Select the Manual Touch Area Setting:
2-1. After the camera captures the projection image, a Touch
18
Area window appears. If the captured image is not clear, re-
select Ambient light mode selection from Auto to Bright or Dim
according to the ambient light condition.
Captiva Touch User Manual
020-000838-01 Rev. 1 (08-2015)