Christie Captiva Touch User Manual page 25

6. Go to the official website of the laptop/computer manufacturer,
7. Go to the official website of the laptop/computer manufacturer,
8. Use the USB cable included with your projector and check
9. The USB port of your computer maybe not working. Contact
Q4 There is only single touch point
A:
1. Re-plug the USB cable from the computer.
2. Go to "Control Panel" and make sure "Tablet PC Components"
Q5 When should Calibration and Touch Area Setting be done?
A: Perform Calibration and Touch Area setting during initial
installation. If the projector or whiteboard is moved, Touch Area
Setting and Calibration must be performed again.
-
-
-
Captiva Touch User Manual
020-000838-01 Rev. 1 (08-2015)
and update USB driver to the latest version.
and update BIOS driver to the latest version.
again. If an USB extension is needed, contact your distributor.
your IT staff.
is selected.
When Laptop/computer resolution is changed, calibrate again.
For better accuracy, perform Manual Calibration.
If an overlarge offset is observed, perform Manual Calibration
and see Step 8 Calibration for troubleshooting.
TroUBlesHooTiNg
25