Christie Captiva Touch User Manual page 6

sTeP 1: eNviroNmeNT CHeCk
B. Whiteboard guideline
When installing the Captiva Touch on a whiteboard, follow the
guidelines below:
B-1. For standard aspect ratio (4:3, 16:10 and 16:9)
`
From the top of image area, a gap must be kept 2~10
cm away from the bottom of LCT module.
`
For suggested whiteboard frame design (height <3 mm),
keep 10 mm bezel at left/right/bottom of image area.
`
For regular whiteboard (ex: aluminum frame, height >3
mm), keep 50 mm bezel at left/right/bottom of image area.
~bezel
B-2. For ultra-wide aspect ratio (16:6)
`
From the top of image area, a gap must be kept 4~10
cm away from the bottom of LCT module.
`
For suggested whiteboard frame design (height <3 mm),
keep 10 mm bezel at left/right/bottom of image area.
`
For regular whiteboard (ex: aluminum frame, height >3
mm), keep 50 mm bezel at left/right/bottom of image area.
~bezel
6
gap: 2~10 cm
For standard aspect ratio (4:3, 16:10 and 16:9)
gap: 4~10 cm
For ultra-wide aspect ratio (16:6)
White board frame
~bezel
White board frame
~bezel
~bezel
~bezel
Captiva Touch User Manual
020-000838-01 Rev. 1 (08-2015)