Christie Captiva Touch User Manual page 16

sTeP 6: laser Beam aligNmeNT
6. Check the beam height with the alignment sticker. The beams
should be located within the grey zone.
7. Press the button again to switch back to IR mode (the blue LED will
stay solid).
Mode
IR Laser mode
Visible light mode
Error
16
LED indicator
Blue LED Red LED
Solid --
Solid Blinking
--
Always ON Error of LD module occurred
Description
IR laser ON
Visible light ON (IR Laser OFF,
touch disabled)
Captiva Touch User Manual
020-000838-01 Rev. 1 (08-2015)