Christie Captiva Touch User Manual page 27

3. Check the Projector Color Mode selection. To ensure accuracy
Color Mode
Q8 The mouse cursor ( ) flashes or jumps on screen, or when
Touch function does not work well at certain projection area?
A:
1. Check if strong light is shown on the whiteboard. If yes, turn
2. Check if any foreign object is on the whiteboard. If yes,
3. Refer to Step 6 (page 11) Laser Beam Alignment for detailed
4. Refer to Step 7 (page 14) Touch Area Setting for detailed
Q9 The projection area corner is insensitive or intermittent lines are
observed?
A:
1. Adjust the level of Touch Sensitivity to enhance sensitivity,
2. If the Touch function remains insensitive, check the optical
Q10 The Touch function is not accurate?
A: Touch accuracy may be impacted when the Windows default
display setting under Windows has been changed.
1. Go to the setting page <Start menu/Control Panel/Appearance
Captiva Touch User Manual
020-000838-01 Rev. 1 (08-2015)
Laser Power Mode
of both Auto Touch Area Setting and Auto Calibration, it is
recommended to switch Color mode to Bright Mode.
Bright
off the light.
remove the object.
procedures, to see if laser beam is aligned.
procedures. Check if the Touch Area boundary is located
properly.
see Step 9 (page 17) Touch Sensitivity for trouble-shooting.
port condition. If dust or particles are observed, gently clean
the optical port with a dust blower.
and Personalization>.
Normal
PC Movie
TroUBlesHooTiNg
ECO
Game User
27