Chapter 9 Maintenance and service
Exchange of rollers
The lifetime of drive rollers in the bearings depend on the appropriate load and the
conveyor speed.
They are normally sufficient for an operational time of 4-5 years. After this time it is
advisable to exchange the bearing or rollers.
Spare parts
Safety instructions
Wiring diagram
The wiring diagram is included in switch cabinet.
Version: 30.07.14
Hazard from incorrect spare parts!
HEALTH HAZARD!
Incorrect or faulty spare parts can impair safety and cause injury
or damage to the machine
- Only use original spare parts or parts that are specifically ap-
proved by the Bluhm Weber Group.
Page 51 of 57
40001136 Geset 125
GB