Table of Contents
Advertisement
Chapter 7 Adjustment and initial operation
Positioning device and scales
The labeling station is provided with different positioning devices, and its handling is
described in advance.
Screwings (without „grip") or similar are mountings that may normally not have to be
adjusted.
No.
1
2
3
4
5
6
7
Version: 30.07.14
Hazard from damages caused by improper use of interlocks.
Positioning equipment has interlocks (normally clamp levers) to
ensure a connection that is force-fit.
- Loosen all interlocks of the respective positioning device
before each change of position!
- Tighten again the respective interlock after the change of
position!
Description
CRANK
DIGITAL-COUNTER [mm], 1/10 [mm
CLAMP LEVER (INTERLOCK)
SPINDLE
SPINDLE SLIDE
CLAMP LEVER
CLAMPING PIECE
Page 33 of 57
40001136 Geset 125
Fig. 7-1: Examples for positioning device
GB
Advertisement
Table of Contents
