Weber Geset 125 Original User Manual page 26

Chapter 5 Transport
The transport will be arranged by a Technician of the Bluhm Weber Group or by
authorized specialists.
Requirements
The labeling system is packed when delivered (with possible exceptions), that is:

It is standing on a pallet

It may be wrapped with stretch film or in a transport box

It may be secured with additional straps and the plate feet may be screwed to the
pallet

Access ways to the machine are sufficiently dimensioned and not blocked.
Required equipment

Suitable means transport (double pallet trucks or forklifts) with a sufficient lifting
force (weight s. chapter "Specifications"). When using a forklift, drive slowly.

Use a steel strapping cutter to remove the straps

A crescent wrench for the transport securing devices
No.
1
2
3
4
Version: 30.07.14
Remove the packaging material and the transport securing
devices only at the site of use, and transport the labeling system in
its original packaging to the labeling site. If the labeling system is
not secured, it can tip over easily when transported.
Description
TRANSPORT BOX
STRAP
TRANSPORT SECURING SCREW
RUBBER FEET
Page 26 of 57
40001136 Geset 125
Fig. 5-1: Examples of packaging
GB