Table of Contents
Advertisement
Chapter 10 Troubleshooting
10. Troubleshooting
Instructions to arrange the troubleshooting address only to trained personnel.
If the service personnel is not able to remedy the failure, please contact our Service-
Hotline (see page 7).
Safety instructions
Version: 30.07.14
Hazard from direct or indirect contact with voltage-
conducting parts.
DANGER TO LIFE!
Contact of persons with parts that became live by faults.
- Before performing any work at the labeling station, disconnect it
from electrical power.
Hazards from actively controlled movements.
RISK OF INJURY FROM CRUSHING!
The movements of the labeling system are motor-driven by an
automatic controller in automatic operation.
-
Maintain a distance from moving parts.
Entanglement hazard by rotating elements.
ENTANGLEMENT HAZARD!
Rotating elements at the machine, backing rewinder, label feed,
conveyor belt are driven by a motor.
-
Do not grip in, at or between the moving parts.
Page 52 of 57
40001136 Geset 125
GB
Advertisement
Table of Contents
