Settings That Can Be Changed Or Confirmed While Printing - Xerox 8254E User Manual

4.9.3.2

Settings that can be changed or confirmed while printing

• The Print start menu is displayed only when the printer is warming up.
• When you change a setting during operation, be sure to select "Backup" to save the
setting that you changed.
• If the printer returns to "Ready to Print" mode without "Backup" being selected, the
changed setting is not saved.
Setup item
Print Start
Temperature
Pre-Heater
Platen Heater
After Heater
PF Adjust
Backup
8254E / 8264E User Guide
Setting
• [Enter] key: If the heater temperature does not reach
—
Pre Check the current Pre-Heater temperature.
Platen Check the current Platen Heater temperature.
After Check the current After Heater temperature.
Off / 30 °C to 50 °C Change the Pre-Heater temperature.
Off / 30 °C to 50 °C Change the Platen Heater temperature.
Off / 30 °C to 50 °C Change the After Heater temperature.
–20 pulse to 0 to 20 pulse Change the feed adjustment value.
—
• [Enter] key: Save the changed setting.
• [Cancel] key: "Ready to Print" displays in the control
—
Description
the set value during warming-up, printing starts.
panel.
4 Handling The Printer
161