Table of Contents
Advertisement
3 Preparing For A Job
f.
Press the [Enter] key. "Ready to Print" displays in the control panel.
•
The set value for Bi-D Quality is registered.
9. 8264E and 8254E - Register the setting for Bi-D Normal (two-way printing/normal mode) in the
same way as in Step 8a through 8f.
a. Display the "Adjust Print" menu in the control panel in the same way as in Step 5.
b. Substitute "Adj. 6 Bi-D Normal" for "Adj.5: Bi-D Quality."
c. Perform the remaining Steps 8c through 8f.
•
The set value for Bi-D Normal is registered.
•
"Ready to Print" displays in the control panel.
10. 8264E only - Register the setting for Bi-D Speed (two-way printing/speed mode) in the same way as
in Step 8a through 8f.
a. Display the "Adjust Print" menu in the control panel in the same way as in Step 5.
b. Substitute "Adj. 7 Bi-D Speed" for "Adj.5: Bi-D Quality."
c. Perform the remaining Steps 8c through 8f.
•
The set value for Bi-D Speed is registered.
•
"Ready to Print" displays in the control panel.
The Alignment procedure is complete.
74
8254E / 8264E User Guide
Advertisement
Table of Contents
Troubleshooting
