User Media Menu - Xerox 8254E User Manual

4 Handling The Printer
4.6.1.1.1

User media menu

Allows you to set up the configuration of various settings for the media being used. Configurations can
be set for thirty different media in the User media menu.
• If media other than a recommended one is used, the following problems may occur.
• Media detection error
• Slant, snag and wrinkle of media
• Media jams
• Favorable print quality cannot be obtained due to blots, blurs or dirt.
• End detection of roll media cannot be performed.
The problems caused by the use of unrecommended media will not be covered by the
warranty and repair expenses will be paid by the customer. For details, contact your
local XEROX dealer.
Setup item
Type 1 to Type 30
90
Setting
Print Mode Sets up the print mode according to the usage of print
data or print speed.
• Pressing the [Enter] key shifts to the sub menu.
PF Adjust Allows configuration of various Media feed
compensation settings.
• Pressing the [>] key: shifts to the sub menu.
Pre-Heater Sets up the Pre-Heater temperature.
• Pressing the [Enter] key shifts to the sub menu.
Platen Heater Sets up the Platen Heater temperature.
• Pressing the [Enter] key shifts to the sub menu.
After Heater Sets up the After Heater temperature.
• Pressing the [Enter] key shifts to the sub menu.
StandbyHeating Sets up the length of time to preheat the heater while the
printer is in standby mode.
• Pressing the [Enter] key shifts to the sub menu.
Vacuum Fan Sets up the vacuum fan operation.
• Pressing the [Enter] key shifts to the sub menu.
• Pressing the [Cancel] key shifts to the previous menu.
—
Description
4.6.1.1.2 Print Mode menu
4.6.1.1.3 PF Adjust menu
4.6.1.1.4 Pre-Heater menu
4.6.1.1.5 Platen Heater menu
4.6.1.1.6 After Heater menu
4.6.1.1.7 StandbyHeating menu
4.6.1.1.8 Vacuum Fan menu
4.6.1.1 MediaType menu
8254E / 8264E User Guide