Xerox 8254E User Manual page 181

No.
5 Is the printer used in an environment
other than the one specified, such as
near an air conditioner?
6 Are you using folded, torn or rolled
media?
(3) The wrong media size is set during initialization
No.
1 Are you using recommended media? Use recommended media.
2 Is the media loaded at an angle?
3 When the media is set, does it curl
upward?
4 Is the printer used in an environment
other than the one specified, such as
near an air conditioner?
5 Are you using media that has been
printed on already?
(4) Media jams frequently occur
• If media other than the recommended one is used, correct media feeding cannot be
assured.
No.
1 Are you using recommended media? Use recommended media.
2 Is the media used in an environment
other than the one specified?
3 Are you using old media?
4 Are you using folded or wrinkled
media?
5 Does the media bend?
(5) The media veers off-track during printing
No.
1 Are you using recommended media? Use recommended media.
2 Is the loading position of the media
correct?
8254E / 8264E User Guide
Possible cause
Only use the printer in an environment that
is specified for use.
Replace the media.
Possible cause
Set the media straight.
Straighten the media or set a new media.
Only use the printer in an environment that
is specified for use.
Use new media.
Possible cause
Use the media in a dedicated environment.
Replace it with new media.
Use recommended media.
When using media other than the dedicated
one, set the Vacuum Fan menu.
Possible cause
Set the media correctly.
Remedy
Installation manual
Installation manual
for handling media
Remedy
media
media
Installation manual
Installation manual
Remedy
for handling media
roll media
Fan menu
Remedy
media
5 Troubleshooting
Reference
8254E
8264E
4.4.2 Precautions
Reference
4.4.1 Media type
3.5.2 Setting roll
3.5.2 Setting roll
8254E
8264E
4.4.1 Media type
Reference
4.4.1 Media type
4.4.2 Precautions
6.2.2 Replacing
4.4.1 Media type
4.6.1.1.8 Vacuum
Reference
4.4.1 Media type
3.5.2 Setting roll
171