4 Handling The Printer
4.6.1.24 Gateway menu
Allows you to set the Gateway.
•
Be sure to set the Gateway after consulting your network administrator.
Setup item
Gateway
4.6.1.25 8254E only- Front Interlace
Allows you to set the front treatment function. This function is applied when the banding appears at the
beginning of a print.
Setup item
Front Interlace
4.6.1.26 8254E only - Media Cut menu
Allows you to set up media cutting
Setup item
MediaCut
112
Setting
000.000.000.000 to
Changes the Gateway through the following keys.
<192.168.001.254> to
• Pressing the [+] key increases the setting value.
255.255.255.255
• Pressing the [–] key decreases the setting value.
• Pressing the [Enter] key changes the setting for the
• Pressing the [Cancel] key saves the setting and shifts
—
Setting
Off
The front treatment function is not used.
<On>
The front treatment function is used.
• Pressing the [Enter] key saves the setting and shifts to
• Pressing the [Cancel] key cancels the setting and
—
Setting
<Off>
The media feed is not performed after printing.
Manual
Feeds media to the Media Cut position after printing.
Use a regular razor blade available from hardware
stores.
Cut menu is set to "Manual"
• Pressing the [Enter] key saves the setting and shifts to
• Pressing the [Cancel] key cancels the setting and
—
Description
next segment.
to the previous menu.
4.6.1 Setup menu (Setup item 1 of 7 total)
Description
the previous menu.
shifts to the previous menu.
4.6.1 Setup menu (Setup item 1 of 7 total)
Description
4.10.1.2 8254E Cutting media when the Media
the previous menu.
shifts to the previous menu.
4.6.1 Setup menu (Setup item 1 of 7 total)
8254E / 8264E User Guide