Table of Contents
Advertisement
3. Load the roll media.
3.5.2 Setting roll media
4. Set the media holder plates by sliding them from both sides of the platen.
•
Do not use the media holder plates for media whose thickness is 400μm (0.4mm)
or greater. The media holder plate may interfere with the print head.
No.
1
2
3
4
5. After installing the media holder plates, make sure that they do not interfere with the media as it is
fed through the printer.
•
If a media jams when using the media holder plates, the plates may be deformed.
If the media holder plates are deformed:
•
Do not remove the clogged media by force.
•
Stop using the printer.
Using the printer with deformed media plates may damage the grid roller or print
heads. If you need to replace media plates, contact your local XEROX dealer.
8254E / 8264E User Guide
Roll media
Media holder plate
Media loading position
Platen
Name
4 Handling The Printer
141
Advertisement
Table of Contents
Troubleshooting
