Origin Menu - Xerox 8254E User Manual

4 Handling The Printer
4.6.1.8

Origin menu

Allows you to set the location at which the printing of data will begin (i.e., its origin). Set the menu when
reprinting on the margin with changing the printing data position to the printed media.
Setup item
Origin
104
Setting
• X (print head transferring Changes the print head position and media feeding
distance): distance using the following keys.
00000mm to 99,999mm • Pressing the [>] key decreases the print head
• Y (media feeding • Pressing the [<] key increases the print head
distance):
00000mm to 9,999mm
• Pressing the [+] key increases the media feeding
• Pressing the [–] key decreases the media feeding
• Pressing the [Enter] key causes "Moving Origin Pos."
Confirm Position→Enter • Pressing the [Enter] key or allowing a certain period
• Pressing the [Cancel] key cancels the setting and
—
Description
transferring distance.
transferring distance.
distance.
distance.
1. Starting position
2. Media feeding direction
to be displayed in the control panel and the print head
to move to the starting position.
The following is then displayed in the control panel:
"Confirm Pos."
"Ready to Print"
of time to pass determines the setting.
Print head returns to the original position.
Save the setting and shift to the previous menu.
4.6.1 Setup menu (Setup item 1 of 7 total)
shifts to the previous menu.
4.6.1 Setup menu (Setup item 1 of 7 total)
8254E / 8264E User Guide