Flushing Menu - Xerox 8254E User Manual

Setup item
Effect (cont.)
4.6.1.3

Flushing menu

This menu allows you to set up the Flushing operation.
Setup item
Flushing
8254E / 8264E User Guide
Setting
B-S.Fine&Wave Same as immediately above. Performs "Wave" printing
using only half of the print head's nozzles but uses the
other side nozzles (designated as the B side).
Again, since only half of the print head's nozzles are
used, the time to print is twice as long as it is when
"Wave 1, 2, 3, or 4" is used.
Set up this menu if you need to improve the print quality
compared with "Fine&Wave 1 to 4."
• Pressing the [Enter] key saves the setting and shifts to
• Pressing the [Cancel] key cancels the setting and
—
Setting
Origin Directs the flushing operation to return to the original
flushing box every time the print head goes and returns.
• Pressing the [Enter] key saves the setting and shifts to
<On Media> Performs the flushing operation on the page margins.
Improves the print quality compared to returning to the
original flushing box.
• Pressing the [Enter] key saves the setting and shifts to
• Pressing the [Cancel] key cancels the setting and
—
Description
the previous menu.
shifts to the previous menu.
4.6.1 Setup menu (Setup item 1 of 7 total)
Description
the previous menu.
4.6.1 Setup menu (Setup item 1 of 7 total)
the sub menu.
4.6.1.3.1 Flushing Return Count menu
shifts to the previous menu.
4.6.1 Setup menu (Setup item 1 of 7 total)
4 Handling The Printer
99