Media-Related Troubleshooting - Xerox 8254E User Manual

5 Troubleshooting
5.2.3

Media-related troubleshooting

(1) The media slips or is torn during initialization
• If the media is jammed or torn, remove it according to
No.
1 Are you using recommended media?
2 Is the loading position of the media
correct?
3 8264E only - Is the roll media set
correctly?
4 8254E only -Is the scroller set
correctly?
5 Are there any foreign materials such as
paper attached to the pressurizing
roller?
6 Is the printer being used in an
environment other than the one
specified, such as in direct sunlight?
7 Are you using folded, torn or rolled
media?
8 Does the media bend?
(2) The media is crumpled during initialization
• If the media is jammed or torn, remove it according to
No.
1 Are you using recommended media?
2 Is the loading position of the media
correct?
3 Is the media loaded at an angle?
4 Are there any foreign materials such as
paper attached to the pressurizing
roller?
170
Possible cause
Use recommended media.
Set the media correctly.
eeding media
Set the scroller correctly.
Clean the pressurizing roller.
Only use the printer in an environment that
is specified for use.
Replace the media.
Use recommended media.
When using media other than the dedicated
one, set the Vacuum Fan menu.
Possible cause
Use recommended media.
Set the media correctly.
Set the media straight.
Clean the pressurizing roller.
5.4 When media jams occur
Remedy
correctly.
5.4 When media jams occur
Remedy
.
Reference
4.4.1 Media type
3.5.2 Setting roll
media
3.5.1 Loading
roll mediaa
3.5.1 Loading
roll media
6.3.2 Cleaning
the inside of the
printer
8254E
Installation manual
8264E
Installation manual
4.4.2 Precautions
for handling media
4.4.1 Media type
4.6.1.1.8 Vacuum
Fan menu
.
Reference
4.4.1 Media type
3.5.2 Setting roll
media
3.5.2 Setting roll
media
6.3.2 Cleaning
the inside of the
printer
8254E / 8264E User Guide