2.3.2
Printer rear
2.3.2.1
8264E Rear section
No.
1
Roll media holders
2
Media feed slot
3
Ink cartridge slots
4
Media guide
5
AC inlets (2)
6
USB connector
7
Network interface connector
8
Waste fluid tank
9
Waste fluid valve
8254E / 8264E User Guide
Name
Used to load the roll media.
Include flanges that are inserted into the roll media's core and the ratcheting
levers that lock the roll media holders in place.
Used for feeding the media from back to front.
Used to hold the ink cartridges.
Used for feeding the media smoothly when the media is set or printed.
The Pre-Heater used to warm media is installed under the media guide.
Used for connecting the power cable.
Not used for this printer.
Used to connect a network interface cable.
Used for collecting the waste ink discharged from the printer.
Used when discharging the waste fluid from the waste fluid tank.
It is normally closed.
2 Product Overview
Function
21