Settings That Can Be Changed Or Confirmed While Printing - Xerox 8264E User Manual

Settings that can be changed or confirmed while printing

Notes:
• The Print start menu is displayed only when the printer is warming up.
• When you change a setting during operation, be sure to select "Backup" to save the
setting that you changed.
• If the printer returns to "Ready to Print" mode without "Backup" being selected, the
changed setting is not saved.
Setup item
Print Start
Temperature
Pre-Heater
Platen Heater
After Heater
PF Adjust
Backup
Setting Description
•[Enter] key: If the heater temperature does not reach the
—
set value during warming-up, printing starts.
Pre Check the current Pre-Heater temperature.
Platen Check the current Platen Heater temperature.
After Check the current After Heater temperature.
Off / 30 °C to 50 °C Change the Pre-Heater temperature.
Off / 30 °C to 50 °C Change the Platen Heater temperature.
Off / 30 °C to 50 °C Change the After Heater temperature.
–20 pulse to 0 to 20 Change the feed adjustment value.
pulse
•[Enter] key: Save the changed setting.
—
•[Cancel] key: "Ready to Print" displays in the control panel.
—
Xerox 8254E / 8264E Color Wide Format Printer
Handling the Printer
4-95
User Guide