GE EST iO64 Technical Reference Manual page 119

panel, the system displays the number of old devices and the
number of new devices.
8. Press Enter to continue.
Auto programming continues based on the settings you made
above.
9. When prompted, program the options you selected using the
procedures that follow. For example, if you are using a dialer,
auto programming requires you to program specific dialer
options.
10. When auto programming is complete, the system returns you
to the banner screen.
Dialer options programming
Account 1 Account ID: Enter four-digit ID code for account 1 (Note: If you
do not change the default of FFFF, no events will be sent.)
Primary receiver number: Enter the primary receiver's phone
number. Up to 20 digits (0-9, *, #, and ,). The comma causes a
two second delay in dialing. The number or hash symbol (#) and
the asterisk symbol (*) are used with calling feature codes and
services. Consult your telephone service provider for more
information.
Secondary receiver number: Enter the secondary receiver's
phone number. Up to 20 digits (0-9, *, #, and ,). The comma
causes a two second delay in dialing.
Format: CID
CID: Contact ID is the alarm format that the monitoring facility
(DACR) will receive. See "Contact ID event codes" for more
information.
Event notification: Set event notification (event reporting) to:
Device: Only device information is reported/transmitted, no
zone information. Note: This setting uses default device event
notification settings for reporting events. Refer to "Factory
default settings" for more information.
Zone: When a device is a member of a zone, only the zone
information is reported/transmitted, no device information.
Account 2 Account ID: Enter four-digit ID code for account 2
Primary receiver number: Enter the primary receiver's phone
number (up to 20 digits).
EST iO64 and iO500 Technical Reference Manual
Chapter 3: Programming
Auto Program
System Busy
################
<Back <Cancel
⇩
Devices Old/New
Loop 1 XXX/YYY
Loop 2 XXX/YYY
<Continue
-OR-
Devices: Old/New
XXX/YYY
<Continue
Account 1
Account ID 6769
Primary Recver#
Secondary Recver#
⇩
Account 2
Account ID 6769
Primary Recver#
Secondary Recver#
⇩
Format CID<>
Event Notif. Event>
--------------------
Save
>
>
>
>
109