Cabletron Systems SmartCell 6A000 Installation And Setup Manual page 31

Configuring the Switch
To obtain an explanation of a command and its parameters, enter the word help (or ?) before the command.
SmartSwitch # ? add laneclient
Create LANE Client
============================================================================
ClientNumber
LanName
ServerType
ServerAddress
IPAddress
NetMask
MTU
SmartSwitch #
While entering a command, you can obtain help about the current parameter by entering a question mark (?) at the
prompt. For example:
SmartSwitch # add atmroute
PortNumber(A1)
AtmAddress()
PrefixLength(104)
Index(0)
Type(Internal)
The type of reachability. Use Internal, Exterior, or Reject.
Type(Internal)
Scope(0)
MetricsTag(0)
SmartSwitch #
To back out of any command, press the
Note
For complete information about using you SmartSwitch ATM switch, see the
Note
SmartSwitch ATM User Guide.
Local Client Number (0-127)
Name of the ELAN to join
Type of LANE Server [LECS, LES]
ATM Address of the LANE Server
IP Address of the Client
IP Netmask of the Client
MTU for the Client [1516, 9234, NONE]
: a3
: 39:00:00:00:00:00:00:00:00:00:14:72:80
:
:
: ? — We want help on this
:exterior
:
:
key before entering the last value.
Esc
SmartSwitch 6A000 Installation and Setup Guide 3-9
Using the Console