Cabletron Systems SmartCell 6A000 Installation And Setup Manual page 28

Using the Console
Entering parameters at the command line is optional. If a command requires parameter values, it prompts you for them.
For instance, in the example below,
indicating that you want to show configuration information about port
SmartSwitch # show portconfig a1
=========================================================
Port Name : A1
Trans Type : STS-3c
Media Type : MMF (S)
---------------------------------------------------------
Parameters
---------------------------------------------------------
Sig Type
Sig Role
Interface Type
Max Vpi Bits
Max Vci Bits
Max Svc Vpci
Min Svc Vci
Max Vccs
Max Svp Vpci
Max Vpcs
ILMI State
Port State
Port Bandwidth
SmartSwitch #
If you don't specify parameters with the command, the console prompts you for an input value and provides a default
value displayed in parenthesis. For example, if you enter
the following appears. Here, the default of "
, or you can enter a specific port number. Taking the default (
Enter
SmartSwitch # show portconfig
PortNumber(ALL)
Port Intf Sig
Name Type Type
==============================================================================
A1 private autoConfig
A2 private autoConfig
A3 private autoConfig
A4 private autoConfig
B1 private autoConfig
B2 private autoConfig
B3 private autoConfig
CPU private uni40
CPU.1 private pnni10
C1 private autoConfig
C2 private autoConfig
C3 private autoConfig
C4 private autoConfig
D1 private autoConfig
More(<space>/q)?:
When you accept the (
Note
abridged.
3-6 SmartSwitch 6A000 Installation and Setup Guide
is the operator,
show
Configured Current
autoConfig autoConfig
other other
private private
0 0
12 12
0 0
32 32
4096 4096
0 0
0 0
Admin State up Oper State down
Admin State up Oper State down
Max 150.00 MBS Used 0.00
" ports is presented. You can either accept the default by pressing
all
: — We accept the default, "Show all ports."
ILMI Trans
State Type
down STS-3c
down STS-3c
down STS-3c
down STS-3c
down STS-3c
down STS-3c
down STS-3c
down STS-3c
down STS-3c
down STS-3c
down STS-3c
down STS-3c
down STS-3c
down DS3
) default for
all
is the switch-attribute, and
portconfig
.
A1
MBS
without specifying a port (as a parameter),
show portconfig
), displays the following:
all
Media Max Used
Type Bw(MBS) Bw(MBS) State
MMF (S) 150.00 0.00
MMF (S) 150.00 0.00
MMF (S) 150.00 0.00
MMF (S) 150.00 0.00
MMF (S) 150.00 0.00
MMF (S) 150.00 0.00
MMF (S) 150.00 0.00
155.52 11.13
11.13 0.00
MMF (S) 150.00 0.00
MMF (S) 150.00 0.00
MMF (S) 150.00 0.00
MMF (S) 150.00 0.00
Coax 40.70 0.00
, the information displayed is often
show
Configuring the Switch
is the parameter
a1
Oper
down
down
down
down
down
down
down
up
up
down
down
down
down
down