Introduction - Cabletron Systems SmartCell 6A000 Installation And Setup Manual

Enterasys smartcell 6a000: install guide

Hide thumbs Also See for SmartCell 6A000:

Table of Contents

1 INTRODUCTION

Welcome to the SmartCell 6A000 Installation and Setup Manual. The SmartCell 6A000 ATM switch is a module that

fits into the SmartSwitch 6000 chassis. You can install as many as five SmartCell 6A000 switches into a SmartSwitch

6000 chassis (using the 6C305-3 power supply). The module is hot swap-able, meaning that you can install and remove

it without turning off or disconnecting the chassis.

This manual provides instructions for installing and setting up the SmartSwitch 6A000 ATM switch module.

This manual provides information about

•

Unpacking and inspecting your switch module

•

Installing your switch module in the SmartSwitch 6000 chassis

•

Configuring your switch to be functional on your network

•

Using the command line console

•

Using the SmartSwitch ATM Administrator graphical network management software

•

Obtaining customer support

This manual also provides detailed mechanical, electrical, and performance specifications for the SmartSwitch 6A000

ATM switch.

For additional information about using the SmartSwitch 6A000, see the

Note

SmartSwitch ATM User Guide. For a complete explanation of all SmartSwitch

6A000 console commands, see the SmartSwitch ATM Switch Reference Manual.

SmartSwitch 6A000 Installation and Setup Guide 1-1

Table of Contents

Do you have a question about the SmartCell 6A000 and is the answer not in the manual?