Virtual Ports; Console Commands - Cabletron Systems SmartCell 6A000 Installation And Setup Manual

Configuring the Switch

Virtual Ports

Virtual ports are designated by a period (
example, virtual port 2 on physical port
3.2.2

Console Commands

Note For detailed descriptions of all console commands, see the SmartSwitch ATM
Switch Reference Manual.
All console commands use the syntax:
operator switch-attribute [<parameter 1> <parameter 2>... <parameter n>]
Where the operator is one of the following:
( ): Show the current values used by a switch-attribute.
show display
( ): Add a new instance of a switch-attribute.
add create
( ): Delete an instance of a switch-attribute.
delete remove
( ): Change the values that currently define a switch-attribute.
modify set
: Start a process on the switch; for example, start the LAN Emulation Configuration Server.
start
: Restart a process on the switch; for example, restart a client.
restart
: Remove assigned values; for example, flush a route table.
flush
: Create easier names for often-used commands and their parameters.
alias
), and the virtual port number is appended to the physical port number. For
.
is represented as:
A5 A5.2
SmartSwitch 6A000 Installation and Setup Guide 3-5
Using the Console