Table of Contents
Advertisement
Field Descriptions
Refer to
Table 6-4
for a functional description of each screen field.
Table 6-4 IP Connectivity Test (Ping) Screen Field Descriptions
Use this field...
IP Address
Test Time
Interval
Success/Failure
[Start] command
6.2.3
HTTP Configuration Screen
Screen Navigation Path
Password > Main Menu > Management Setup Menu > Network Configuration Menu > HTTP
Configuration
When to Use
To enable or disable the on-board Web agent, and to specify the TCP port that will provide HTTP
service.
How to Access
Use the arrow keys to highlight the HTTP Configuration menu item on the Network
Configuration Menu screen and press ENTER. The HTTP Configuration screen,
displays.
To...
Enter the IP address of the site that you want to ping.
Set the number of ICMP echo requests sent to the specified
site. Range: 1~1000
Set the interval (in seconds) between pinging the specified
site. Range: 1~10 seconds
See the number of times the specified site has or has not
responded to pinging.
Initiate the ping. To ping an address, highlight [Start] using
the arrow keys, then press ENTER.
Management Setup Menu Screens
Network Configuration Menu Screen
Figure
6-5,
6-9
Advertisement
Table of Contents
