Downloading Via Tftp - Enterasys Matrix E5 5H153-50-G User Manual

11.9.2 Downloading via TFTP

To perform a TFTP download, you must first configure the switch. This consists of programming
the switch with an IP address, if this has not already been done, and entering the IP address of the
TFTP server and the name of the upgrade file.
To program the switch IP address, select Management Setup Menu from the Main Menu screen,
then select Network Configuration Menu.
To download switch software via TFTP, proceed as follows:
1. Select Download Server IP from the TFTP Download screen.
2. Enter the TFTP server IP address and press ENTER.
3. Select Download Filename and enter the file name to be downloaded from the TFTP server.
NOTE: For a TFTP download, the path to the file must be included in its name. For
example, if the upgrade file name is filename.bin and it resides in the directory /usr/tftp
on the TFTP server, then you must enter the TFTP file name as:
"/usr/tftp/filename.fls".
4. If necessary, configure the address of an IP gateway to reach the server from the switch using
the Gateway IP field in the Network Configuration/IP Configuration menu.
5. Configure the TFTP server by copying the download file from the upgrade disk to an appropriate
directory and starting the server.
6. Select Process TFTP Download and press ENTER.
To verify that the TFTP download has been successfully completed, note the software version
level displayed on the Switch Information screen accessible from the System Information Menu.
This number should match the version number that appears on the upgrade disk.
Downloading a Software Upgrade
Configuring and Monitoring the Switch 11-7