Table of Contents
Advertisement
Field Descriptions
Refer to
Table 7-8
for a functional description of each screen field.
Table 7-8 STA Bridge Information Screen Field Descriptions
Use this field...
Priority
Hello Time
(in seconds)
Max Age
(in seconds)
Forward Delay
(in seconds)
Hold Time
Designated Root
Root Cost
Root Port
Configuration Changes
Topology Up Time
To...
See the selected root device, root port, and designated port.
The device with the highest priority becomes the STA root
device. However, if all devices have the same priority, the
device with the lowest MAC address will then become the
root device.
See the time interval at which the root device transmits a
configuration message.
See the maximum time a device can wait without receiving
a configuration message before attempting to reconfigure.
See the maximum time the root device will wait before
changing states (i.e., from listening to learning to
forwarding).
See the minimum interval between the transmission of
consecutive Configuration BPDUs.
See the priority and MAC address of the device in the
spanning tree that this switch has accepted as the root
device.
See the path cost from the root port on this switch to the root
device.
See the number of the port on this switch that is closest to
the root. This switch communicates with the root device
through this port. If there is no root port, then this switch
has been accepted as the root device of the spanning tree
network.
See the number of times the spanning tree has been
reconfigured.
See the time since the spanning tree was last reconfigured.
Spanning Tree Information Menu Screen
Device Control Menu Screens
7-17
Advertisement
Table of Contents
