Port Information Screen - Enterasys Matrix E5 5H153-50-G User Manual

Port Information Screen

Table 7-2 Port Configuration Screen Field Descriptions (Continued)
Use this field...
Flow Control
Speed and
Duplex
7.3 PORT INFORMATION SCREEN
Screen Navigation Path
Password > Main Menu > Device Control Menu > Port Information
When to Use
To display the port type, status, link state, and flow control in use, as well as the communication
speed and duplex mode. To change any of the port settings, refer to the Port Configuration screen
description, Section
panel ports.
How to Access
Use the arrow keys to highlight the Port Information menu item on the Device Control Menu
screen and press ENTER. The Port Information screen,
7-6 Device Control Menu Screens
To...
Enable or disable flow control. Flow control can eliminate frame loss by
"blocking" traffic from end stations or segments connected directly to the
switch when its buffers fill. Back pressure is used for half duplex and IEEE
802.3x for full duplex. Do not use flow control if a port is connected to a
hub. The default is DISABLED.
Set the current port speed, duplex mode, and auto-negotiation.
(Auto-negotiation is not available for 100Base-FX ports.) The default is
AUTO.
7.2. The parameters shown in Figure 7-3 and Table 7-3
Figure 7-3, displays.
are for the RJ45 front