Heartland VALUE Series Assembly Manual page 65

• Use acrylic latex caulk that is paintable. Caulk at all horizontal and vertical seams, between the trim and walls, and all

around the door trim.

• Use a high quality exterior acrylic latex paint. When painting your building, there are a few key areas that can be easily

overlooked that must be painted:

• Bottom edge of all siding and trim

• Inside of doors and all 4 edges

Note:

Prime all un-primed exterior wood before painting.

(Follow directions provided by manufacturer.)

PARTS REQUIRED:

NOTE: Install drip edge to back of shed before installing roofing felt.

You must install drip edge to validate warranty.

BEGIN

Install drip edge flush along back roof

panels. Flush ends to trim.

Secure with 1" roofing nails 6" apart.

Only nail top of drip edge.

Cut drip edge

flush to trim

Install roofing felt flush to

all roof edges, overlapping 3".

Flush

You must install roof felt to validate warranty.

PAINT & CAULK

- NOT INCLUDED -

DRIP EDGE

16" TYP.

(40,6 cm)

OVERLAP

1" Roofing

Nails

BACK

OF SHED

Cut drip edge

flush to trim

Soho modern