Heartland VALUE Series Assembly Manual page 58

PARTS REQUIRED:
x2 or x4
AH
19/32" x 2-1/2" x 26-5/8" (1,5 x 6,3 x 67,6 cm)
x2
FDA
19/32" x 2-1/2" x 55-1/8" (1,5 x 6,3 x 141,9 cm)
x1
OWB
You have 3 options for door trim, see Fig. C.
BEGIN
1
Secure hinge boards from inside using 3/4" screws (Fig. A).
Position FDA centered and square with bottom door trim.
2
Secure with 3/4" screws from inside of doors (Fig. B).
3 Position and square upper horizontal door rail AH at top of FDA.
Secure with 3/4" screws from inside of doors.
4
Reinforce the door trim with 3/4" screws through door panel into trim
(Fig. A). Locate screws as shown (Fig. B).
5
Center trim OWB over doors and secure using (5) 2" nails into framing.
2" (5,1)
Finish Nails
OWB
Flush
AH
Trim Option 1
Flush
6
Center metal threshold between doors and secure with
(11) 3/4" special coating screws into fl oor (Fig. D).
(11) Special Coating Screws
Fig. D
FINISH
You have fi nished attaching your door trim and threshold.
DOOR TRIM
x1
19/32" x 2" x 72" (1,5 x 5,1 x 182,9 cm)
Nail into framing.
CENTER
3/4" (1,9 cm)
Screws
FDA
64" Metal Threshold
3/4" (1,9 cm)
x11
Bagged separately / special coating
9" (22,9 cm)
AH
3/4" (1,9 cm)
Screws from behind.
Door
Panel
AH
Door
Trim
FDA
43-5/8"
(118,4 cm)
Cut FDA for
Trim Option 2
Optional AH
56
x5
2" (5,1 cm)
x54
or 60
3/4" (1,9 cm)
Fig. C
Trim Option 2 Trim Option 3
Customize your door trim; use 1 of 3 options:
Assembly for Option 1 is shown in main image.
If you choose Option 2, cut FDA to 43-5/8" (118,4 cm).
Install AH at 9" down from door upper trim.
Follow steps 1-4. Add more screws as needed.
Fig. A
Hinge
Board
9" (22,9 cm)
CENTER CENTER
9" (22,9 cm)
Fig. B