Heartland VALUE Series Assembly Manual page 47

PARTS REQUIRED:
x1
UDR
19/32" x 3-1/2" x 61-1/16" (1,5 x 8,9 x 155,1 cm)
x1
UDL
19/32" x 3-1/2" x 61-1/16" (1,5 x 8,9 x 155,1 cm)
x2
OY
2 x 3 x 72" (5,1 x 7,6 x 182,8 cm)
BEGIN
1
To build right side fascia assembly, place RMA and OY end to end on a fl at surface (Fig. A).
RMA
Place UDR and WQA primed side up and fl ush with RMA and OY.
2
Secure with 2" fi nished nails, as shown (Fig. B, C).
RMA
Edges of UDR and
RMA are fl ush.
3
To build left side fascia assembly, place RMA and OY end to end on a fl at surface (Fig. C).
OY
Place UDL and WQA primed side up and fl ush with RMA and OY.
4
Secure with 2" fi nished nails as shown (Fig. D, E).
OY
FINISH
You have fi nished assembling the side fascia trim.
SIDE FASCIA TRIM ASSEMBLY
x2
x2
UDR
WQA
RMA
2 x 3 x 31-15/16" (5,1 x 7,6 x 81,1 cm)
WQA
19/32" x 3-1/2" x 45" (1,5 x 8,9 x 114,3 cm)
OY
OY
WQA
RMA
UDL
Edges of UDL and
RMA are fl ush.
45
x28
2" (5,1 cm)
Fig. A
Fig. C
Fig. B
Fig. C
RMA
Fig. D
Fig. E
Flush
Flush