Heartland VALUE Series Assembly Manual page 36

PARTS REQUIRED:
(Left / Green)
x1
3/8" x 2-11/16" x 12-1/4" (1,5 x 6,8 x 31,1 cm)
BEGIN
Install 2-11/16" x 12-1/4" triangular fi ller panel using (2) 1-1/2" nails.
1
Flush fi ller panel to installed panels (Red for right side) as shown.
2
Measure and mark location of studs 20" from center of panel seam as shown.
Secure side wall panels to inside wall studs with 1-1/2" nails 6" apart along panel seam
and 12" apart in middle of panels.
1-1/2"
(3,2 cm)
Nails
Repeat STEPS 1 - 2 to secure the opposite side wall panels.
FINISH
Your side walls are now completed.
SIDE WALL PANELS
(Right / Red)
x1
3/8" x 2-11/16" x 12-1/4" (1,5 x 6,8 x 31,1 cm)
20" 20"
(50,8 cm) (50,8 cm)
6" (15,2 cm)
34
x90
2-11/16" x 12-1/4"
Filler Panel
12"
(30,5 cm)
1-1/2" (3,8 cm)