Heartland VALUE Series Assembly Manual page 31

RAFTERS
PARTS REQUIRED:
x36
3" (7,6 cm)
x9 SDC
x18
2 x 4 x 92-3/16" (5,1 x 10,2 x 234,2 cm)
2" (5,1 cm)
BEGIN
1 Measure and mark location of each rafter. Note the door location.
2
Center rafters on marks. Secure rafters with 2" screws installed centered into outer rafter ends (Fig. A).
Continue securing rafters with 3" screws toe-screwed into doublers (Fig. B).
2" (5,1 cm)
Screw
Fig. B
Fig. A
3" (7,6 cm)
Screws
angled
Flush
Flush
SDC
DOOR 10"
(25,4 cm)
BEGIN HERE
26" (66,1 cm)
42" (106,7 cm)
58" (147,4 cm)
74" (188 cm)
90" (228,6 cm)
106" (269,3 cm)
122" (309,9 cm)
138" (350,5 cm)
29