Heartland VALUE Series Assembly Manual page 61

PARTS REQUIRED:
x1
BEGIN
1 Measure and mark position on right door as shown.
Pre-drill 1/4" hole at mark. Finish hole using 1/2" drill bit.
2
Position hardware in hole and secure with screws as shown.
FINISH
Your door handle is now installed.
DOOR HARDWARE
1-3/4"
(4,4 cm)
35-3/4"
(90,8 cm)
Set Screw
INSTALL HANDLE
ON RIGHT DOOR.
TOP VIEW
1/4" Pre-drill and
1/2" Drill-through.
1-3/4"
(4,4 cm)
59
x2
1-1/2" (3,8 cm)
1/4" (0,6 cm)
1/2" (1,3 cm)
Drill Bits
1-1/2"
(3,8 cm)
Screws x2