General; Target Group; Use Of Warning, Caution, Information And Tip Icon - ABB LVS Digital Manual

G EN ER A L
—

1. General

1.1. Target Group

This document describes communication and control interfaces used in LVS Digital (includes
MNS Digital and NeoGear Digital switchgear) and LVS Digital Upgrade (upgrade from INSUM1
/ 2) projects utilizing ABB motor controller M10x [M101 / M102].
The manual is primarily intended for those requiring information on how to access infor-
mation and data provided from Digital Gateway.
Furthermore, the document provides information for control system and application engi-
neers how to integrate MNS Digital [Upgrade] as Fieldbus component into PLC or higher-level
Process Control Systems.
It is assumed that the reader of this manual is familiar with basic terms of Fieldbus and con-
trol communication (e.g. basic knowledge about Modbus etc.).
1.2. Use of Warning, Caution, Information and Tip
icon
This publication includes Warning, Caution, and Information icons where appropriate to
point out safety related or other important information. It also includes Tip icons to point out
useful hints to the reader. The corresponding symbols should be interpreted as follows:
The electrical warning icon indicates the presence of a hazard that could result in
electrical shock
The warning icon indicates the presence of a hazard that could result in
injury
The caution icon indicates important information or warnings related to the con-
cept discussed in the text. It might indicate the presence of a hazard that could re-
sult in
The information icon alerts the reader to pertinent facts and conditions
The tip icon indicates advice on, for example, how to design your project or how to
use a certain function
Although Warning notices are related to personal injury, and Caution notices are associated
with equipment or property damage, it should be understood that the operation of damaged
equipment could, under certain operational conditions, result in impaired process
performance leading to personal injury or death. It is therefore, imperative that you comply
fully with all Warning and Caution notices.
1 TG C90 80 04
.
corruption of software or damage to equipment/property
TARG ET GR OUP
personal
1