S ET T ING S – D CS MO DB US RT U CO MMU N ICAT IO N
PLC Failsafe Time Out
Modbus Interface
DCS Command Format
Table 13 Digital Gateway Default Parameters – Modbus RTU configuration
Configuration of the parameters is done via MNavigate. The parameters must then be
downloaded to the Digital Gateway.
Figure 33 Parameter Window for MODBUS RTU parameters in MNavigate
40
10
1....100
RS232
RS232,
RS485,
RS422
MNSiS
MNSiS,
INSUM 1,
INSUM 2
f
CO NF IG UR AT IO NS
Delay until Failsafe is activated
Type of serial interface
Only for MNS Digital Upgrade
solution for INSUM 1 and 2:
Support of DCS command format in
INSUM 1, INSUM 2 and MNSiS
1 TG C90 80 04