Table 36 Digital Gateway Led Indication - ABB LVS Digital Manual

TR OUB LESHOOT IN G A N D MA INT ENA NCE
LED indication

Table 36 Digital Gateway LED indication

1 TG C90 80 04
Description
General DCS fault
(only available if con-
figured)
General DCS fault
(only available if con-
figured)
General redundancy
fault (only available if
configured)
General redundancy
fault (only available if
configured)
D IG ITA L GAT EWAY LED I ND ICATI O N
Additional Information / Actions
Please check if Digital Gateway
ware (the identity number) matches to the
project specification (e.g. Profibus Digital
Gateway <-> Profibus project).
Furthermore, the Data Mapping should be
checked
Please use MNavigate to download the
Digital Gateway configuration or down-
load Mapping file again (ref. to MNavigate
Help or MNavigate Manual)
See above
LED 8
Digital Gateway is Primary in
Dual Redundant configuration.
Please use MNavigate to check the
redundancy status (Redundancy Report).
If a mismatch was found, please download
the regarding file.
For details please refer to MNavigate
Help or MNavigate Manual.
See above
LED 6
DCS communication active
hard-
67