Settings - Ip Configuration; Figure 30 Ip Address Settings; Figure 31 Time Sync Settings; Table 11 Digital Gateway Default Parameters - Ip Configuration - ABB LVS Digital Manual

With m10x motor controller

Hide thumbs Also See for LVS Digital:

Table of Contents

S ET T ING S – IP CON FI GUR AT IO N

Broadcast Address LAN3 192.168.171.255

Default Gateway LAN3

Time Synchronization

Time Server Address

Table 11 Digital Gateway Default Parameters – IP Configuration

7.2. Settings – IP Configuration

All configuration settings and parameterization for the Digital Gateway are configured with

the MNavigate software tool.

Digital Gateway does not support DHCP service to get automatic network ad-

dress. If the default IP Address and Subnet Mask must be manually adjusted, the

parameter above has to be modified and copied to the Digital Gateway. Any

change in the address requires the Digital Gateway to be restarted before the

change is activated.

It has to be ensured that the Subnet address (xxx.xxx.xxx.yyy) for LAN1, LAN2 &

LAN3 port is different. For example, LAN1 = 192.168.100.100 and LAN2 =

192.168.200.100

192.168.171.1

RTC,

RTC

NTP

0.0.0.0

Calculated automatically

LAN 3 is not used

RTC=internal clock, NTP=if external

NTP server is available

Settings according to network

administrator

CO NF IG UR AT IO NS

1 TG C90 80 04

Table of Contents

Troubleshooting