M6 structure dimension: (unit: mm)
Fig 3.1.9 Servo drive structure size 7
Note: All changes of structure dimension without prior notice.
3.2 Installation of Servo motor
3.2.1 Installation location
Install the servo motor in an environment free from corrosive or inflammable gases or
combustibles, such as hydrogen sulfide, chlorine, ammonia, sulphur gas, chloridize gas, acid,
soda and salt.
Select and use the servo motor with oil seal in a place with grinding fluid, oil spray, iron
powder or cuttings.
Install the servo motor away from heat sources such as heating stove.
Never use the servo motor in an enclosed environment. Working in the enclosed
environment could result in high temperature of the servo motor, which will shorten its
service life.
FL20-CA Series
40