Keypad Operating Procedure - Parker FL20-CA Series Product Manual

5.3 Keypad Operating Procedure

5.3.1 Example for parameter setting of monitoring functional area
Take usage of Lo-14(DI8~DI5 status display）as the example:
FL20-CA Series
Power on
Status display
MODE Press MODE key
Monitor Mode
Press UP key
▲
Up to Lo-14
Input terminal
DI 8 ~DI5 status monitor
Press SET key to 0.5s
No terminal ON
External DI5 terminal is ON
The status of terminal
DI5 has changed.
Terminal DI5 is OFF
The status of terminal DI5 has
changed again.
MODE Press MODE key
Return to Lo-14
87