Safety Norms - BIANCHI VENDING BVM972 Use And Maintenance Manual

BIANCHI VENDING GROUP Spa declines any responsibility for
damages caused to people or belongings in consequence to:
Incorrect installation
Inappropriate electrical and/or water connection.
Inadequate cleaning and maintenance
Not authorized modifi cations
Improper use of the distributor
Not original spare parts
– Under no circumstances is Bianchi Vending Group Spa obliged
to compensate for eventual damage resulting from the forced
suspension of drink deliveries as the result of faults.
– Installation and maintenance operations , must be done exclu-
sively by qualifi ed technical personnel with prior training for
carrying out these duties.
– For refi lling use only food products that are specifi c for auto-
matic vending machines.
– The automatic distributor is not suitable for external installation.
The machine must be installed in dry places, with temperatures
that never go below 1°C it must not be installed in places where
cleaning is done with water hoses (ex. big kitchens.).
Do not use water jets to clean the machine.
III - SAFETY NORMS
ATTENTION!
– before using the automatic distributor, read this
manual carefully.
– The installation and maintenance operations must be performed
exclusively by qualifi ed technical personnel.
– The user must not in any circumstance be able accede to those
parts of the automatic distributor that are protected and require
a tool in order to be accessible.
– The knowledge and the absolute respect, from a technical point
of view of the safety instructions and of the danger notices con-
tained in this manual, constitute the basis for the operation ,
in conditions of minimum risk, of the installation, starting and
maintenance of the machine.
Always disconnect the POWER CABLE before main-
tenance or cleaning interventions.
ABSOLUTELY DO NOT INTERVENE ON THE MACHINE
AND DO NOT REMOVE ANY PROTECTION BEFORE THE
COOLING OF THE HOT PARTS!
– The functional reliability and optimization of machine's ser-
vices are guaranteed only if original parts are used.
– In order to guarantee normal operation, the machine must be
installed in areas that the environmental temperature is between
a minimum of +1°C and a maximum of +50°C end humidity of
not over 85%.
– In order to guarantee a regular operation, always maintain the
automatic distributor in perfect cleaning conditions
– If at the moment of the installation, if conditions differing from
those indicated in the present manual, or should the same un-
dergo changes in time, the manufacturer must be immediately
contacted before use of the machine.
– Also check that any other eventual norms or regulations as laid
down by national or local legislation are taken into account and
applied.
9