BIANCHI VENDING BVM972 Use And Maintenance Manual page 53

– The second format "Operators" includes the list of the operators
in charge of the maintenance of the different distributors, with
relevant data (address, telephone number, E-mail,etc.)
By clicking twice on one of the operators in the list a window will
appear similar to the previous one showing as additional options
the possibility to modify any fi eld and not only the form note
using the EDIT key and the possibility to enter a new operator
by pressing ADD NEW key; this insertion must be confi rmed by
pressing OK key.
– The third format "Sale Point" includes the list of the customers
having at least one distributor enabled for the telemetry service,
with the data to track them; similarly to the operators format,
by clicking twice on one of the customers in the list a window
will appear showing the different fi elds and giving the same
possibilities of intervention as the previous window.
- The fourth format "Vending Machine" includes the list of the
distributors with the following fi elds: "Description" specifying
the type of machine; "Serial number" specifying the serial
number; "GSM" specifying the number of SIM board installed
in the machine; "Sale point" specifying the customer where the
distributor is installed; "Operator" specifying the technician in
charge of that specifi c distributor and fi nally "Notes" including
the comments, if any
– By clicking twice on one of distributors in the list, a window will
appear showing, as the previous windows, the previously listed
fi eld, the major difference lying in the fact that if a data sheet
is modifi ed with Edit key or a new distributor is added with Add
New key, the Sale Point and Operator fi elds will allow you to
enter only one of the corresponding items listed in the formats
described above, while in the Description item one of the types
of machine listed in the pull-down list must be selected.
NB: if new elements must be added to the list of distributor, fi rst
of all it will be necessary to enter the new Operators and Sale
Points in the corresponding formats and then the new Vending
machines; the above to avoid that when the operator and sale
point data are coupled, in the creation of the new vending machine
there will be no possibility to try and enter any item not included
in the insertion list.
Important: When a new Distributor is added in the "Communica-
tion GSM" fi eld I must ABSOLUTELY enter the number with +39
at the beginning.
Send SMS Section
This section gives the possibility to send an SMS by writing in the
window with the portable phone icon the number of the receiver
and entering the message text in the bigger window; in the top
right hand corner there is also a counter showing the number of
characters entered (2nd number) as well as the total number of
available characters (1st number).
At the end of the message text, this will be sent to the selected
number by pressing SEND key.
Status Section
This section provides some information about the Modem and
the connection and in particular about the operator of the board
inserted in the Modem ("Operator" fi eld) and the "Signal Quality"
fi eld providing an indication of the current power of the network
signal.
53